A Clean, Multipurpose Agency Theme
Showing posts with label CAD. Show all posts
Showing posts with label CAD. Show all posts
Holset HY40-V Vanes and Vane Ring CAD
Some excellent CAD work here showing the vanes and vane rings of the HY40-V with some dimensions and rendering effects. These models will be used as part of the CFD and FEA models for analysis of the benchmark product:
 |
| Holset HY40-V Vane |
 |
| Holset HY40-V Nozzle Ring |
CAD: Holset HY40-V Turbine Housing
In addition to the internal air volute Minda has begun creation of the cast iron turbine housing. Once completed images will be added below, the current view shows a work in progress:
CAD: Air Volume for use in CFD Modeling
A big step forward in the modeling stage was made with the completion of the air volume. Mindaugas created this model in Solidworks from technical drawings of the turbine housing and the data from the CMM and FaroArm scans (see the labels on the right for articles on this).
Once imported into ANSYS FLUENT, the vanes will be subtracted using a boolean operation leaving a body of air behind for simulation:
Once imported into ANSYS FLUENT, the vanes will be subtracted using a boolean operation leaving a body of air behind for simulation:
Turbine Rotor CAD images
Mindaugas has been busy on Solidworks and has produced some excellent models for use in our simulations, the turbine model is shown here:
 |
| Turbine Wheel of the HY-40V Variable Geometry Turbocharger |
CAD: FaroArm and CMM Machine Results
A few images created from solidworks following the laser scanning process of the turbine housing, the full CAD models will be up soon!
 |
| Initial Scan data of the HY40-V turbine housing |
 |
| Data points from FaroArm scan and CMM machine |
Subscribe to:
Posts (Atom)